Instant Access

Designing Medical Devices for Safety, Reliability, and Maintainability

4418
Duration75 Minutes
Dev Raheja
Instructor

Dev Raheja

View profile

The challenges faced by medical device manufacturers in bringing safe, reliable, low overall life-cycle cost devices to market in a timely manner is increasing rapidly. The increasing complexity and software criticality of medical devices is driving the need for a proactive practice of risk prevention. However, theoretical knowledge is not enough.

The number of FDA product recalls in the U.S. has been going up for the last 10 years. The FDA receives more than 10,000 complaints per year on infusion pumps alone. Some pump manufacturers say that most problems occur when a nurse or health care worker enters the wrong data accidentally. However, FDA officials found that many deaths and injuries related to the devices were caused by product design and engineering flaws, rather than user error. The current recalls in the last 12 months is over 1000, roughly 20 recalls per week. Over 60% failures are from poor reliability and safety considerations in the device design. Often, maintenance processes are inadequate and not error free. This webinar introduces the science of maintainability where the goal is to minimize maintenance and design out maintenance errors.

Critical failure is not an option in medical devices. Therefore this webinar focuses on high reliability and equally on high patient safety. It covers best practices in eliminating designing devices cheaper, better, and faster!

Course Objectives:

The legal system, The FDA, and the European standards require the device to be safe as long as it is in use. Therefore high reliability is an obvious requirement. Besides, it is a value proposition for the business: zero warranty costs, safe customers, more loyal customers, and more sales.

The FDA reviews the results of the performance tests during pre-market approvals, and in complaint investigations. Therefore a thorough understanding of designing device for long, reliable and safe life by the entire staff is critical in efficient business strategy.

Course Outline:

• The process for designing for reliability
• The process for  designing for safety
• System Hazard Analysis
• The process for designing for maintainability
• Designing for Inherent Quality
• Designing to Forgive User Errors
• Design control
• Testing for reliability
• Testing for safety
• Production testing for validating reliability and safety

What You Get:

• Training Materials
• Live Q&A Session with our Expert
• Participation Certificate
• Access to Signup Community (Optional)
• Reward Points

Who Will Benefit:

• Senior management
• Design staff
• Manufacturing engineering staff
• Software engineering staff
• Regulatory affairs professionals
• Marketing Managers
• Service managers
• Project Managers and engineers
• Quality Assurance staff
• Regulatory staff
• IT professionals looking to make the design process efficient


Course Description:


The challenges faced by medical device manufacturers in bringing safe, reliable, low overall life-cycle cost devices to market in a timely manner is increasing rapidly. The increasing complexity and software criticality of medical devices is driving the need for a proactive practice of risk prevention. However, theoretical knowledge is not enough. 


The number of FDA product recalls in the U.S. has been going up for the last 10 years. The FDA receives more than 10,000 complaints per year on infusion pumps alone. Some pump manufacturers say that most problems occur when a nurse or health care worker enters the wrong data accidentally. However, FDA officials found that many deaths and injuries related to the devices were caused by product design and engineering flaws, rather than user error. The current recalls in the last 12 months is over 1000, roughly 20 recalls per week. Over 60% failures are from poor reliability and safety considerations in the device design. Often, maintenance processes are inadequate and not error free. This webinar introduces the science of maintainability where the goal is to minimize maintenance and design out maintenance errors. 


Critical failure is not an option in medical devices. Therefore this webinar focuses on high reliability and equally on high patient safety. It covers best practices in eliminating designing devices cheaper, better, and faster!


Course Objective:


The legal system, The FDA, and the European standards require the device to be safe as long as it is in use. Therefore high reliability is an obvious requirement. Besides, it is a value proposition for the business: zero warranty costs, safe customers, more loyal customers, and more sales.


The FDA reviews the results of the performance tests during pre-market approvals, and in complaint investigations. Therefore a thorough understanding of designing device for long, reliable and safe life by the entire staff is critical in efficient business strategy.


Course Outline:


  • The process for designing for reliability 
  • The process for  designing for safety
  • System Hazard Analysis
  • The process for designing for maintainability
  • Designing for Inherent Quality
  • Designing to Forgive User Errors 
  • Design control 
  • Testing for reliability
  • Testing for safety
  • Production testing for validating reliability and safety 

Target Audience:


  • Senior management 
  • Design staff
  • Manufacturing engineering staff
  • Software engineering staff
  • Regulatory affairs professionals 
  • Marketing Managers
  • Service managers
  • Project Managers and engineers
  • Quality Assurance staff
  • Regulatory staff
  • IT professionals looking to make the design process efficient
Please reach us at 1-888-844-8963 for any further assistance or if you wish to register

100% MONEY BACK GUARANTEED

Refund / Cancellation policy

Get In Touch

Subject : Designing Medical Devices for Safety, Reliability, and Maintainability


Similar Trainings

FDA's Emerging Signals Guidance: Reporting Medical Device Safety Warnings
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 60 Minutes
View Program
Understanding the Brazilian Regulatory Environment for Medical Devices
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 60 Minutes
View Program
Effective Records Management & Document Control for Medical Devices
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 60 Minutes
View Program
Special Considerations during Medical Device Design - Dos and Don'ts
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 60 Minutes
View Program
The Use and Misuse Of FMEA In Medical Device Risk Management
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 75 Minutes
View Program