Instant Access

Equipment Validation, Tracking, Calibration and Preventive Maintenance

4286
Duration60 Minutes
Jeff Kasoff
Instructor

Jeff Kasoff

View profile

This session will review the regulatory requirements for validation, including detailed review of IQ, OQ, and PQ. A sample validation process will be followed through each phase. Documentation requirements for both protocol and results will be reviewed along with a list of pitfalls to avoid in documenting your validation. The importance of the Master Validation Plan will be discussed too. Preventive maintenance will be covered, including how to assure it does not adversely impact validated processes. A cost-effective equipment calibration program will be featured as well.

FDA and EU regulations require that firms have a program for the calibration and maintenance of test and measurement equipment. The program must include: intervals, scheduling, specific procedures, limits of accuracy/precision, and remedial action in the event that the equipment does not meet established requirements. Prior to use, however, this equipment must be validated to make sure it produces product that meets its specifications. There are ways, though, to validate equipment already in use.

Course Objectives:

• Types of Validation
• The Validation Sequence
• Calibration Frequency and How to Reduce It
• Understanding of Calibration Traceability
• Benefits of Equipment Calibration Outsourcing
• Calibration Remediation Requirements

Why Should You Attend:

Medical devices and pharmaceutical products must be safe and effective. Equipment used in assembly, test, or measurement must be able to be used for its intended purpose, and result in product that meets its required specifications. It is not cost effective to routinely measure product to evaluate conformance to all specifications. It is, therefore, critical to have an in depth understanding of the methods for establishing equipment and corresponding processes that assure product output on a routine basis.

Course Outline:

• Equipment Validation
      o Installation Qualification
      o Operation Qualification
      o Performance Qualification
• Equipment Calibration
• Use of Calibration Standards for Efficiency and Accuracy
• Remedial Action for Out-of-Calibration Equipment
• Calibration vs. Maintenance: Which One?
• Equipment Maintenance

Who Will Benefit:

This webinar will provide valuable assistance to all personnel involved in equipment/process development:

• QA management
• Quality Engineering staff
• R&D management
• Engineering management
• Production management
• Manufacturing Engineering staff
• Design engineers
• Reliability engineers
• Calibration technicians
• Maintenance personnel

Please reach us at 1-888-844-8963 for any further assistance or if you wish to register

100% MONEY BACK GUARANTEED

Refund / Cancellation policy

Get In Touch

Subject : Equipment Validation, Tracking, Calibration and Preventive Maintenance


Similar Trainings

6-hr Virtual Seminar: Understanding Corrective and Preventive Action in FDA- and ISO-Regulated Industry
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 360 Minutes
View Program
Project Management for Computer Systems Validation and 21 CFR 11 / Annex 11
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 90 Minutes
View Program
How to Conduct a Human Factors/ Usability Validation
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 60 Minutes
View Program
Effective and Practical use of FMEA For Risk-Based Approach to Computer Systems Validation
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 90 Minutes
View Program
GAMP® 5 System Classification and Compliance for Computer Systems Regulated by FDA
Life Sciences Medical Device | Diagnostic | Pharmaceutical | Biologics fields
Get Instant Access 90 Minutes
View Program